SKU: GCP-413

Cool, sleek, fine. This mesh corset will give you the compression, fit and curves you deserve while keeping you at the just the right temperature. The front and back panels, boning channels, and trim are made from a white satin. The lacing is made from matching white satin ribbon. 

Add a white satin modesty panel or other accessories to your order and save. Accessories

About the Gemini Corset:

Your hips must be at least 10 inches greater than your waist to fit the Gemini Corset. 

TWO SILHOUETTES TO CHOOSE FROM:

The Gemini corset is offered in two silhouettes: Conical (Straight) rib and Round (Cupped) rib!

The Round (Cupped) rib version is designed to cup over the ribcage and place compression around the waist, while leaving room for the ribs. This is appropriate for those who have larger or inflexible ribs.

The Conical (Straight) rib is cut straight from the underbust to waist, and will give you a tapered look with more compression on the floating ribs. This is recommended more for experienced corset wearers and those with a naturally smaller or flexible ribcage.

Both silhouettes are identical from the waist to hips; only the ribcage is affected.

CURVE:

The Gemini corset is designed for experienced corset wearers or those with naturally curvy figures. It is one step curvier than the hourglass corset: where the hourglass has a 6.5" rib spring, the Gemini will have an 8" rib spring. Where the hourglass has a 10" high hip spring, the Gemini has a 12" high hip spring. A customer who can fit the hourglass corset in size 26" should be able to comfortably fit the Gemini in size 24".

A LONGLINE LOOK - WITHOUT THE LENGTH:

The Gemini has the look of a longline corset, so it extends down over the hips on the side and accommodates a 16" low hip spring. The longline corset is aesthetically preferred among some corset wearers. The extra smoothing and support over the hip area provides a beautiful silhouette, and in many cases the corset snuggles better under the waistband of slacks and skirts compared to corsets cut high over the hips. However, you don't have to be long-waisted to wear the Gemini, because it's same length as the regular hourglass in the front and along the princess seam! It will fit anyone with a waist length of 9 inches or more. It will fit like a comfortable longline corset for a petite or short-waisted person.

• The number of spiral steel stays varies from 10 to 18 depending on size
  
  
• 6 spring steel stays supporting the grommets and busk
  
  
• ½ inch wide flexible steel busk front closure
  
  
• Matching front modesty placket under the busk
  
  
• Waist tape for added support at the waist line
  
  
• Laced with single faced satin ribbon

Dimensions in Inches:

• Center front: 11" with 10" busk
• Underbust to hip: 9.5"
• Side length: 11"
• Center back: 13.5"  

Corset pattern designed in collaboration with Lucy's Corsetry!